Awaiting product image
Carbon Steel pipe

S275JR Pipe

The S275JR EN 10025 Steel Hot Finished Square Pipe is a low carbon grade structural steel. This grade of high tensile strength structural S275JR RHS and Hot Finished Circular Hollow Section steel is one that could be readily welded to other weldable steel grades as well. In fact, the S275JR Box Section steel pipes could be welded at lower heat as they could be welded at a lower temperature setting as well.  Since the low carbon grade EN 10025 S275JR Steel Pipe has good machining properties and as manufacturers we find it easier to provide finish work not only at the edges but also on the surface of these S275JR Hollow Section steel pipe. Because the S275JR Pipe is known to be a low carbon equivalent steel grade, these pipes possess good cold-forming properties. At Aesteiron, generally the Steel En10025 S275JR Hollow Section pipe is produced by fully killed steel process. And if required by our buyers across several industries, the En 10025 Din 17100 S275JR RHS steel pipes could be supplied either in a normalized condition or in a controlled rolling condition.

S275JR Box Section, S275JR Hollow Section, S275JR RHS and Hot Finished Circular Hollow Section exporter in India

The S275JR Steel Box Hollow Sections is a grade of pipe, wherein the minimum yield strength is approximately around 275 N/mm². Our clients use the S275JR Pipe grade widely in key sectors such as the engineering as well as construction industries. The Jr in Grade S275JR EN 10025 CHS steel pipe indicates that the material used in its manufacture has been subject to a Longitudinal Charpy V-notch. This Longitudinal Charpy V-notch, when performed on the En 10025-2 S275JR RHS has an impact rate of about 27 Joules at a temperature of about 20 °C.

S275JR Pipe Price

  • En S275JR Circular Hollow Section
    FOB Price: US $480.00-$600.00 / Ton
    RFQ

S275JR Pipe Types

S275JR Pipe

En 10025-2 S275JR RHS

S275JR Steel Box Hollow Sections

S275JR EN 10025 Square Tube

En S275JR Circular Hollow Section

S275JR En 10025 Steel Tube

S275JR Pipe Specifications

Specification
  • SAE/AISI 1008 (Si 0,03%)
  • EN 10219 -1- S275 J0H (YS275 Tube) *1
  • EN 10219 -1- S355 MH (S355 Tube) *2
  • EN 10025 -2- S275JR+AR (Pipe) *3
Standard
  • ASTM A53, A106, API 5L, ASME B36.10M-1996
  • DIN1626, DIN1629, DIN17175, DIN 2448
  • JIS G3452, JIS G3454, JIS G3455, JIS G3456, JIS G3461
  • EN10216, EN10217, EN10218, EN10219, EN10210
  • API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, JIS G3452, BS1387
Material
  • A53B, A106B, API 5L B, X42, X46, X52, X60, X65
  • ST37.0, ST35.8, St37.2, St35.4/8, St42, St45, St52
  • STP G38, STP G42, STPT42, STB42, STS42, STPT49
  • P195TR2, P235TR2, P245TR2, P235GH, S235JR, S275JR, S355JR
  • API 5L : GR B, X42,X46, X56, X60,X65,X70
  • ASTM A53: GR A, GR B, GR C
  • EN: S275, S275JR, S355JRH, S355J2H
  • GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
Pipe Size 1/2″ – 38″ (DN15-950)
Wall Thickness SCH10, SCH20, SCH30, STD, SCH40, SCH60, XS, SCH80, SCH100, SCH120, SCH140, SCH160, XXS
Length Fixed: 5.8m, 5.85m, 5.9m, 6.0m, 11.8m, 12m.Random length: 4-12m
Application
  • Boiler, low and medium pressure fluid pipeline, petroleum and natural gas industry, drilling,
  • Chemical, electric industry, shipbuilding, fertilizer equipment and pipelines industries
  • petrochemical, structural, pharmaceutical
Surface Hot / cold galvanized, Black painting,varnish paint, anti rust oil, Coal Tar Epoxy, Bitumen Coating, 3PE, Fusion bond Epoxy coating,
Packing Plastic caps on both ends,Steel bundle,Woven bag or as per request
Specialized in Electric Resistance Welded Steel Pipe
Mfg. Process
  • ERW : Electric Resistance Welded pipe
  • HFI: High Frequency Induction weld pipe
  • EFW: Electric Fusion Welded Pipe
Mill Test Certificate (MTC) EN 10204/3.1B
Important:
*1; J0 = Impact tests @ 0 degrees; H = Hollow sections
*2; M = Thermo mechanical rolling; H = Hollow sections
*3; JR = Impact tests @ room temperature (Optional); AR = As-rolled

Wide range and custom sizes

EN 10025 S275JR Steel Pipe manufacturers, Grade S275JR EN 10025 CHS stockholder, En10025 S275JR Hollow Section, S275JR EN 10025 Steel Hot Finished Square Pipe Price in India

Epoxy Coated ASTM A554 En 10025-2 S275JR Pipe Cement lined EN 10025 S275JR Steel Pipe
Schedule 40 Seamless S275JR Pipe Thin Wall S275JR Pipe
Grade S275JR EN 10025 Schedule 40 Pipe ASME B36.19 ASTM A554 En 10025-2 S275JR Pipe
S275JR En 10025 Steel Schedule 10 Pipe EN 10025 S275JR Steel Double Wall Pipe
En 10025 S275 1.0044 Steel Efw Pipe Epoxy lined S275JR Pipe
DIN 59220 En 10025 S275JR Round Pipe PTFE lined DIN 59220 En 10025 S275JR Natural Gas Pipe
ASTM A554 En 10025-2 S275JR Drill Pipe Grade S275JR EN 10025 Grooved Pipe
EN 10025 S275JR Steel Seamless Pipe Seamless Black S275JR En 10025 Steel Pipe
S275JR Welded Pipe En 10025 S275 1.0044 Steel Oval Pipe
EN 10025 S275JR Carbon Steel Erw Pipe DIN 59220 En 10025 S275JR Casing Pipe
EN 10025 S275JR Steel Square Pipe S275JR En 10025 Steel Hydraulic Pipe
S275JR Rectangular Pipe En 10025 S275 1.0044 Steel Hollow Pipe
EN 10025 S275JR Carbon Steel Welded Rectangular DIN 59220 En 10025 S275JR Oil Pipeline
Large Diameter Seamless Grade S275JR EN 10025 Pipe Schedule 80 Seamless EN 10025 S275JR Steel Pipe

Chemical composition of S275JR Grade En 10025 Rectangular Hollow Section

Check composition of En 10025 Din 17100 S275JR RHS, En 10025 S275 1.0044 Steel Hollow Section, EN 10025 S275JR Hot Finished Structural Hollow Sections. S275JR EN 10025 Square Tube
Grade C
max		 Mn1
max		 P
max		 S
max		 Si Nb, Ti
1008 (Si 0,03%) 0,10 0,50 0,025 0,025 0,005-0,035 –
S275 Tube 0,20 1,50 0,040 0,040 0,035 max –
S355 Tube 0,14 1,50 0,035 0,030 0,15-0,25 0,050 each
S275 Pipe 0,21 1,50 0,035 0,010 – –

Mechanical Strength Table of EN 10025 S275JR British Steel Rectangular Tube

Grade Yield strength (MPa) Tensile strength (MPa) Minimum elongation A5 (%) Impact Test 2
(J)
1008 (Si 0,03%) None None None None
S275 Tube 275-375 430/4151-530 20 27 @ 0ºC
S355 Tube 355-475 450-550 22 27 @ 0ºC
S275 Pipe Min. 275 410-560 23 27 @ 20 ºC (Optional)
 Black en 10025 s275jr ms structural steel pipe available dimensions
Custom sizes available in EN 10025 S275JR Carbon Steel Round Tube, EN 10025 S275JR British Steel Rectangular Tube, EN 10025 S275JR Steel Grade RHS, En 10025 Din 59220 S275JR Pipe and Grade En S275JR Circular Hollow Section
API 5L Supply condition Thickness (mm) Width (mm)
1008 (Si 0,03%) Mill edge 1,0 – 13,0 800 – 1 850 1: 2
S275 Tube Mill edge 2,0 – 6,0 800 – 1 8501: 2
S355 Tube Mill edge 2,5 – 6,0 1185 – 15801: 2
S275 Pipe Mill edge
Side trimmed		 3,0 – 13,0
3,0 – 10,0		 1070 – 18001: 2
Inquire now

Check wide range of styles and sizes with price list

  • S275jr ERW rectangular steel pipes
    FOB Price: US $359.00-$459.00 / Ton
  • astm a53 gr.b s275jr seamless schedule 80 carbon steel pipe
    FOB Price: US $680.00-$760.00 / Ton
  • S275Jr Api 5L Galvanized Carbon Seamless Steel Pipe
    FOB Price: US $300.00-$800.00 / Ton
  • black en 10025 s275jr ms structural steel pipe
    FOB Price: US $500.00-$900.00 / Ton
  • SSAW 3LPE Coated 1400mm Welded Steel S275JR Pipe
    FOB Price: US $430.00-$650.00 / Ton
  • BS1387 s275jr welded steel pipe
    FOB Price: US $650.00-$780.00 / Ton
  • Sq pipe 40x40x1.6 pre galvanised S275JR
    FOB Price: US $800.00-$1,500.00 / Ton
  • Precision cold rolled EN 10025 s275jr structural steel pipe
    FOB Price: US $450.00-$650.00 / Ton
  • S275JR Galvanized iron pipe
    FOB Price: US $650.00-$1,000.00 / Metric Ton
  • 15NiCuMoNb5 S275JR Steel Pipe
    FOB Price: US $650.00-$800.00 / Ton
  • Steel EN 10025 S275JR Hot Finished Structural Hollow Sections
    FOB Price: US $400.00-$500.00 / Ton
  • Steel S275JR EN 10025 Square Tube
    FOB Price: US $550.00-$650.00 / Ton
  • EN 10025 S275JR Carbon Steel Round Tube
    FOB Price: US $500.00-$850.00 / Ton
  • EN 10025 S275JR British Steel Rectangular Tube
    FOB Price: US $420.00-$980.00 / Ton
  • EN 10025 S275JR Steel Grade RHS
    FOB Price: US $650.00-$1,000.00 / Ton
  • En 10025 Din 59220 S275JR Pipe
    FOB Price: US $467.74-$588.70 / Ton
  • Steel Grade En S275JR Circular Hollow Section
    FOB Price: US $480.00-$600.00 / Ton
  • S275JR En 10025 Steel Tube
    FOB Price: US $550.00-$650.00 / Ton
  • S275JR Grade En 10025 Rectangular Hollow Section
    FOB Price: US $400.00-$550.00 / Ton
  • S275jr RHS ERW black steel electric welded rectangular pipe
    FOB Price: US $400.00-$550.00 / Ton

Reviews

There are no reviews yet.

Be the first to review “S275JR Pipe”

Your email address will not be published. Required fields are marked *

Related Products

INQUIRY NOW

© 2023 All rights reserved. Design & Seo by FinPlus
Successfully added to your cart.