Slip On Flanges

Stainless Steel Slip-on flanges Manufacturer, Suppliers, Stockist, Exporter

Slip-on flanges, sometimes referred to as ‘hubbed flanges’, have a low profile hub. This flange type is usually connected to a pipe via one or two crevice welds (one outside and one inside the flange), although a single weld is also attainable.

These flanges are available in various sizes and are commonly favored for ASME class ≤ 600 low-pressure applications. The bore size of a slip-on flange (internal diameter) is larger than its connecting pipe, thus allowing it to slip over the pipe. 

However, due to the absent full penetration weld between the pipe and flange, its strength is significantly low and limits its application. In some cases, If a welding neck flange cannot be used because of space constraints, this Slip-on flange can be a plausible substitute.

Various Materials In Which Of Slip-On-Flanges Are Available

• Stainless Steel

• Carbon Steel

• Alloy Steel

• Duplex & Super Duplex Stainless Steel

• Nickel-Based Alloys 

Features of Slip-On-Flange

• Slip-on flanges are renowned for their low cost of materials and convenient setup. An extra benefit of these flanges is that they can also be utilized as lap-joint flanges if either Type B or Type C ends are being managed.
• Slip-on-flanges offer a vast selection of sizes as well as low-stress designs to settle on. Unlike welding neck flanges, there’s no neck to attach to the pipeline, so double welding is essential.
• Slip-on flanges are ideal for reduced-pressure situations and are quite simple to assemble and weld to differing tubes.
• Slip-on flanges do not necessitate a significant longitudinal gap in the pipeline for installation.

Slip-On Flanges manufacturer in Mumbai |Slip-On Flanges supplier in Mumbai| Slip On Flanges manufacturer in India| Slip On Flanges supplier in India| Stainless Steel Slip On Flanges stockist | Stainless Steel Slip On Flanges exporters | Slip-On Flanges suppliers in Chennai

Benefits of Slip-On Flanges

• Slip-On-Flanges have Low-cost installation
• Less time is needed to be spent on ensuring the accuracy of the cut pipe
• They are somewhat easier to align
• The slip-on flanges have low hubs because the pipe slips into the flange before welding
• Slip-on-flanges are welded from the inside as well as the outside to ensure their strength
• They prevent leakage

Application of Slip-On-Flanges

• Oil, Natural gas, and refined hydrocarbon (steam lines)
• Petrochemical Facilities
• Cryogenic services
• Pump Industries
• Plant engineering
• Waste water recycle plant 
• Paper and pulp Industries
• Chemical Industries
• Power/electricity Industries
• Aerospace
• Food processing industry and many more.
• Marine industry
• Water waste management
• Mechanical engineering
• Food Processing industries and many more

Moreover, these Slip-on-Flanges are also used in various Industries!

• Homes and Buildings used with piping and water piping
• Transporting materials Such as hot water, chemical, oil, gas, and sulfur in various Industries
• Automotive Industries air and water flow system and piping system
• Sewerage System, Industrial water lines, and water mains.
• Heating, ventilating, and air air-conditioning equipment.
• Plumbing
• Shipping/shipment Industries and many more!

Moreover, Hilton Forged India also provides Slip-On-Flanges in a variety of dimensions and specifications.

Standards and specification of Slip-On-Flanges

Particulars	Details
Standards	ANSI, JIS, DIN, EN1092-1, UNI, BS4504, SABS1123, AS2129, GOST-12820
Dimensions	ANSI B 16.5 Slip-On-Flanges, B16.47 Slip-On-Flanges, SERIES A Slip-On-Flanges, SERIES B Slip-On-Flanges, EN1092-1 Slip-On-Flanges, FLANGE BS 1560. BS 10 Slip-On-Flanges, IS 6392, B-2.1 NPT Slip-On-Flanges, API, DIN Slip-On-Flanges, JIS. MSS SP 44 Slip-On-Flanges.
Materials	ASTM A105 Slip-On-Flanges, ASME SA105 Slip-On-Flanges ASTM A182 Slip-On-Flanges , ASME SA182 Slip-On-Flanges  ASTM A350 LF1 Slip-On-Flanges, LF2 CL1/CL2 Slip-On-Flanges, LF3 CL1/CL2 Slip-On-Flanges ASTM A694 F42 Slip-On-Flanges, F46 Slip-On-Flanges, F48 Slip-On-Flanges, F50 Slip-On-Flanges, F52 Slip-On-Flanges, F56 Slip-On-Flanges, F60 Slip-On-Flanges, F65 Slip-On-Flanges, F70 Slip-On-Flanges ASTM B564 Slip-On-Flanges, ASME SB564 Slip-On-Flanges.
Class	Slip-On-Flanges 150#, Slip-On-Flanges 300#, Slip-On-Flanges 600#, Slip-On-Flanges 900#, Slip-On-Flanges 1500# & Slip-On-Flanges 2500#, PN6 Slip-On-Flanges, PN10 Slip-On-Flanges, PN16 Slip-On-Flanges, PN25 Slip-On-Flanges, PN40 Slip-On-Flanges, PN63 Slip-On-Flanges, PN100 Slip-On-Flanges, PN160 Slip-On-Flanges, PN250 Slip-On-Flanges
Size	1/2” NB TO 24” NB
Nickel Alloy	ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 ), ASTM A182  F304/304L Slip-On-Flanges,  ASTM A182  F304H Slip-On-Flanges, ASTM A182  F304L  Slip-On-Flanges, ASTM A182  F304 Slip-On-Flanges, ASTM A182  309H  Slip-On-Flanges, ASTM A182  310H  Slip-On-Flanges,  ASTM A182  310  Slip-On-Flanges   ASTM A182  F316/316L Slip-On-Flanges,  ASTM A182  F316H Slip-On-Flanges, ASTM A182  F316L  Slip-On-Flanges, ASTM A182  F316 Slip-On-Flanges.
Stainless Steel	ASTM A182  F316/316L Slip-On-Flanges,  ASTM A182  F316H Slip-On-Flanges, ASTM A182  F316L  Slip-On-Flanges, ASTM A182  F316 Slip-On-Flanges,  ASTM A182  F316Ti Slip-On-Flanges, ASTM A182  F317 Slip-On-Flanges,  ASTM A182  F317L Slip-On-Flanges, ASTM A182  F321 Slip-On-Flanges,  ASTM A182  F321H Slip-On-Flanges.  ASTM A182  F347 Slip-On-Flanges, ASTM A182  F347H Slip-On-Flanges,  ASTM A182  F904L Slip-On-Flanges ASTM A182  F44 Slip-On-Flanges,  ASTM A182  F51 Slip-On-Flanges,  ASTM A182  F53 Slip-On-Flanges,  ASTM A182  F55 Slip-On-Flanges,  ASTM A182  F60 Slip-On-Flanges
Alloy Steel	ASTM A182 F1, A182 F5, A182 F9, A182 F11, A182 F12, A182 F22, A182 F91

At Hilton Forge India, We also carry out strict tests before supplying them to our customers. We offer an extensive range of flanges, such as Long Weld Neck flanges, Orifice Flanges, Lap Joint Flanges, etc. At Hilton forge India, our state-of-the-art laboratories are fitted with the latest technology, superior quality, and efficient production, which enables us to maintain a huge inventory with numerous items of varied sizes, diverse pressure ratings, and a variety of alloys. As we already have a wide selection of items, we also tailor-make flanges according to the requirements of each customer. 

Flanges Types:-

→  Blind Flange Manufacturer	→  Lap Joint Flanges Manufacturer
→   Long Weld Neck Flanges Manufacturer	→  Orifice Flanges Manufacturer
→  Slip On Flanges Manufacturer	→  Socket Weld Flanges Manufacturer
→  Spectacle Blind Flanges Manufacturer	→  Threaded Flanges Manufacturer
→  Weld Neck Flanges Manufacturer	→  Super Duplex Flanges Manufacturer

Cities We Supply Types of SS Flanges

Bengaluru	Mumbai	Chennai	Hyderabad	Kolkata	Pune
New Delhi	Ahmedabad	Jaipur	Surat	Salem	Gandhinagar
Bhiwandi	Tiruppur	Sivakasi	Jamnagar	Thiruvananthapuram	Rajahmundry
Bhubaneswar	Vijaywada	Firozabad	Bokaro Steel City	Rajkot	Bharuch
Panna	Raipur	Cochin	Ludhiana	Panipat	Durgapur
Peenya	Pimpri-Chinchwad	Channapatna	Kharagpur	Nashik	Bareilly
Varanasi	Haldia	Rourkela	Bangalore	Moradabad	Indore
Visakhapatnam	Trivandrum	Pithampur	Dibrugarh	Angul	Gwalior
Coimbatore	Kannur	Nagpur	Vadodara	Rudrapur	Noida
Agra	Bhagalpur	Jamshedpur	Bhilai	Lucknow	Kanpur
Thane	Bhopal	Sri City	Bareilly	Hosdurg	Pithampur

Countries We Supply and Export Types of Stainless Steel Flanges Globe

Saudi Arabia	Oman	Kuwait
Bahrain	Qatar	UAE
Nigeria	Mexico	Canada
India	Tanzania	Belgium
United States	South Africa	Malaysia
Singapore	Sri-Lanka	Australia
France	Italy	South Korea
Netherlands	Russia	Germany
Poland	Turkey	Brazil
Iran	Europe	United Kingdom

People Also search for

Stainless Steel Flanges Manufacturer in Nashik | Stainless Steel Flanges in Pimpri-Chinchwad | Stainless Steel Flanges | SS Flanges | Stainless Steel Flanges Manufacturers in Navi Mumbai| Stainless Steel Flanges suppliers in Navi Mumbai | Stainless Steel Flanges suppliers in Nashik| Stainless Steel Flanges manufacturer in Maharashtra | Stainless Steel Flanges manufacturer in Gujrat | Stainless Steel Flanges manufacturer in Tamilnadu | Stainless Steel Flanges suppliers in Karnataka | Stainless Steel Flanges suppliers in Bengaluru | Stainless Steel Flanges Stockist in Bengaluru | Stainless Steel Flanges suppliers in Karnataka | Stainless Steel Flanges Manufacturer in Ahmedabad | Stainless Steel Flanges in Vadodara | Stainless Steel Flanges suppliers in Ahmedabad | Stainless Steel Flanges Stockist in Ahmedabad |Stainless Steel Flanges Exporters in Ahmedabad